Our Top pick ‘hypertherm powermax 65 review’. Today, we make our mind to explain the whole aspects of this plasma cutter with its benefits and the justifying points that help you to differentiate it from other cutters.
In A Hurry! Top 4 reasons to buy Hypertherm Powermax 65
. Efficient use.
. Responsive support.
Hypertherm Powermax 65 review
It is one of the best, powerful, and versatile plasma cutter. It includes a maximum output of 65A and can cut 1inche steel at 10 inches within a minute. It also offers a 50% duty cycle, both handheld, and CNC activity.
It comes with high-quality technology and reliable plasma cutting elements. So, it can be set in any industry to run a profitable business. It can manage any heavier materials smoothly. If you are looking for a commercial plasma cutter, you can select it, closing your eyes.
- Smart Sense technology that works to make air pressure automatically when it moves for gouging and cutting.
- It can cut up to 1-inch steel metal at 10IPM in a minute.
- It comes with a robotic torch style.
- Highly resourceful use of consumables.
- Faster cutting speed, high-quality cut, and also longer consumable
- Cutting thickness: ¾ inches (recommended)
- Cutting thickness: 1 inch (max)
- Cutting thickness: 1-1/4 inches (severance)
- Product dimension: 19.7 * 9.2 * 17.9 inches.
- Item weight: 64 pounds
- Latest drag cutting technology
- Automatically adjusting system
- Duramax torch style
- Versatility and reliability.
- Easy to assemble and use.
- After a long time use, the air valve can leak.
- A little bit expensive
- The productivity can hold back for the beginners.
1. Do I need a separate air filter for my air plasma system?
Your machine doesn’t have to have enough air. Instead, it is significant that the air is clean and dry. In this case you need to filter separate air for your plasma system if the existed air is not dry or fresh.
2. Is it okay to use plasma to cut aluminum on a water table?
No, it’s normally not okay to use plasma cutting aluminum on a water table if you don’t prevent the gathering of the hydrogen gas. If you need it, you can consult with the manufacturer or an expert to avoid the risk.
Why should you select this cutter?
The Hypertherm Poermax 65 plasma cutter designed for both industrial and individual use. But why should you select it? There have sufficient reasons to choose it. We will share a few of them for your consideration.
The Hypertherm Powermax 65 includes 52AMP at 200 to 208 voltages that are suitable for single-phase function. It is right and more amperage than the supply of most residential shops. The 240 voltage AMP portrays drops to 44A. But it is a little bit more than the largest dryer outlet.
The best bit will go with 3-phase power when 200volt requires 32A.this requirement can allow you to get full benefits of the 50% duty cycle. The 65 don’t contain plug on the power cord. It just will wire for 3-phase or any single phase. In this case, you have to connect the white, black, with green wires for using the single stage.
2. Air pressure
A significant requirement of any cutter is air pressure. This machine includes lots of clean air pressure that must need for a decent job. This device recommends at 6.7 CFM, but practically you have to require 9-10 CFM range to ensure it doesn’t throw air pressure warning when you work with it.
The operating system of this machine is so simple. It comes to four types of operational modes.They are;
- Continuous pilot arc mode: It works o cut perforated and painted rusty metal.
- Non-continuous pilot arc mode: It works for standard metal plate cutting with verifying thickness.
- Gouging mode: It works for a knocking hole into the plate metal.
- Torch lock mode: It works to press the trigger to fire the torch until the trigger pressed.
You can make a plan to run a thing with a CNC table where it contains a detach package with a machine torch and a remote switch with on/off. It can operate with a standard CNC protocol to control the jobs. The heavy-duty cycle will perform excellent with minimum downtime.
Why are the benefits of this plasma cutter?
1. Easy on consumables
The first reason for selecting the best plasma cutter is to check that they are consumables or not. They are perfect for running a big business at an excellent affordable price. Hypertherm is one of them as it designed the Powermax levels of cutters.
2. Easy to use
The size of this plasma cutter is small. It is lightweight that can provide portability for 5/8 inches small cutting system. Drag cutting technology makes it so easy to use even for the beginner who has no experience of previous.
The Hypertherm Powermax 65 contains a torch connection that allows the user to mechanized operation. An extensive range of torch plus consumables is the excellent versatility to select the automotive process. It is perfect for excellent feature cutting, reaches cutting, and precision gouging.
To finish any complicated job faster with 1.5 times cutting speed, you should select this plasma cutter. You need a short time to give a superior cut with gouge quality for the grinding preparation. A new torch feature will allow you to change out of consumable faster and easier than other plasmas.
This plasma cutter is so reliable because the lock torch of it comes with a high impact design that heats resistance. Spring star technology makes sure consistency starting with optimum performance. It is certified reliability because it can complete jobs with any demanding environment.
6. Easy to assemble
You have to love it because it is so easy to assemble and simple function to operate for its drag-cutting technology. As a result, any beginners can learn to work it in a short time without any trouble. The connection of the torch makes it so easy and makes this machine user-friendly.
7. Made in the USA
Most of the users like the feature and look up it that the machine will make in the USA. This cutter contains this feature, and it is the most crucial factor in selecting it.
The Hypertherm Powermax 65 plasma cutter represented with the pinnacle of plasma cutting technology. It can clean cut on anything up to 1 inch thick. The price of it is affordable, and the investment will go into the right machine. Hopefully, it will b the right and first chooses to use individually or professionally.